Selecting the SIMM Size for Bank 1
Jumper E0392 is used to select the amount of SIMM memory size
for bank 1.
The default position for this jumper is set to STD (standard
mode), pins 1 and 2, when bank 1 contains 2M, 4M, and 8M
SIMMs. For 16M and 32M SIMMs, this jumper must be moved
to pins 2 and 3.
1.
Power off the system and remove the covers as described in
the Upgrades and Options chapter.
2.
Move the SIMM 1 jumper, E0392, to pins 2 and 3.
3.
Replace the covers and power on the system.
04/APRIL/93 – 595-5484-UU
44
3-22
Configuring Your System