Owner’s Manual 45
206-4022
External Control Device Setup
Set ID
Set ID
Use this function to specify a monitor ID number.
Refer to ‘Real Data Mapping’. See page 46.
• Baud rate : 9600 bps (UART)
• Data length : 8 bits
• Parity : None
* Use a crossed (reverse) cable.
• Stop bit : 1 bit
• Communication code : ASCII code
Communication Parameters
Communication Parameters
1. Press the
MENU
button and then use
D
/
E
button to select the
SETUP
menu.
2. Press the
G
button and then use
D
/
E
button to select
SET ID
.
3. Press the
G
button and then use
D
/
E
button to adjust
SET ID
to choose the
desired monitor ID number. The adjustment range of
SET ID
is 1 ~ 99.
4. Press
EXIT
button to return to TV viewing or press
MENU
button to return to the
previous menu.
Transmission
* [Command 1]: First command to control the set.(j,k,m or x)
* [Command 2]: Second command to control the set.
* [Set ID]: You can adjust the set ID to choose desired monitor
ID number in Setup menu. Adjustment range is 1
~ 99. When selecting Set ID ‘0’, every connected
the TV is controlled. Set ID is indicated as decimal
(1~99) on menu and as Hexa decimal (0x0~0x63)
on transmission/receiving protocol.
* [DATA]: To transmit command data.
Transmit ‘FF’ data to read status of command.
* [Cr]: Carriage Return
ASCII code ‘0x0D’
* [ ]: ASCII code ‘space (0x20)’
[Command1][Command2][ ][Set ID][ ][Data][Cr]
T
T
ransmission / Receiving Protocol
ransmission / Receiving Protocol
OK Acknowledgement
* The Monitor transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time, if the
data is data read mode, it indicates present status data. If
the data is data write mode, it returns the data of the PC
computer.
[Command2][ ][Set ID][ ][OK][Data][x]
Error Acknowledgement
* The Monitor transmits ACK (acknowledgement) based on
this format when receiving abnormal data from non-viable
functions or communication errors.
[Command2][ ][Set ID][ ][NG][Data][x]
Data 1: Illegal Code
2: Not supported function
3: Wait more time
01. Power
k
a
0 ~ 1
02. Input Select
k
b
0 ~ 8
03. Aspect Ratio
k
c
*
04. Screen Mute
k
d
0 ~ 1
05. Volume Mute
k
e
0 ~ 2
06. Volume Control
k
f
0 ~ 64
07. Contrast
k
g
0 ~ 64
08. Brightness
k
h
0 ~ 64
09. Color
k
i
0 ~ 64
10. Tint
k
j
0 ~ 64
11. Sharpness
k
k
0 ~ 64
12. OSD Select
k
l
0 ~ 1
13. Remote Control Lock Mode k
m
0 ~ 1
14. Treble
k
r
0 ~ 64
15. Bass
k
s
0 ~ 64
16. Balance
k
t
0 ~ 64
17. Color Temperature
k
u
0 ~ 2
18. ISM Method
j
p
*
19. Low Power
j
q
0 ~ 1
20. Orbiter Time Setting
j
r
1 ~ FE
21. Orbiter Pixel Setting
j
s
1 ~3
COMMAND 1 COMMAND 2
DATA
(Hexadecimal)
Command Reference List
Command Reference List
22. Channel Tuning
m
a
physical/program high
major/program low
major low minor high minor low attribute
23. Channel Add/Del
m
b 00 ~ 01
24. Key
m
c
key code
25. Input Select x b
*
COM-
MAND 2
COM-
MAND 1
DATA 0
(Hexadecimal)
DATA 1
(Hexadecimal)
DATA 2
(Hexadecimal)
DATA 3
(Hexadecimal)
DATA 4
(Hexadecimal)
DATA 5
(Hexadecimal)
