background image

identical model, but when this is not possible, a model of similar 
specification will be provided. The Manufacturer will cover the costs and 
arrange for the delivery of the new product and for the return of the old 
product. Any costs related to disconnecting the faulty product and 
installing the replacement product will not be borne by the Manufacturer 
unless previously agreed to in writing. The original guarantee will continue 
to apply to the replacement product; the new product will not come with a 
new guarantee. 

When will the repair take place?

 

Our engineers work Monday to Friday 9.00am to 5.00pm. Appointments 
outside these hours may be possible at the sole discretion of the 
Manufacturer but cannot be guaranteed. Whilst our Engineers will 
endeavour to minimize inconvenience and to meet requests for specific 
timed appointments, this cannot be guaranteed. The Manufacturer will not 
be liable for delays or if it is unable to carry out a repair because a 
convenient appointment cannot be arranged. 

Will there be any charge for the repairs?

 

It is your responsibility to provide evidence to the Engineer that your 
product is covered by this guarantee with a proof of purchase. The 
Manufacturer reserves the right to charge for the reasonable cost of any 
service call if: 

x

You cannot provide evidence that your product is covered by this guarantee. 

x

Where a service call has been made and the engineer finds that there is no fault 
with your product. 

x

That your product has not been installed or operated in accordance with the User 
Instructions Booklet. 

x

That the fault was caused by something other than faulty materials, defective 
components or manufacturing defects. 

x

For missed appointments. 

Payment of these costs are due immediately upon the Engineer providing 
you with an invoice. If you fail to pay the costs for the service call in a timely 
manner, the Manufacturer reserves the right to terminate the guarantee. 
If you are a resident of the United Kingdom, this guarantee will be 
governed by English law and subject to the English Courts, save where you 
live in another part of the United Kingdom, in which case the law and courts 
of that location will apply.  

EN

28

Summary of Contents for ZICSD373

































Reviews: