Zenith ZP505, Owner'S Manual

7

6

Button Functions, cont.

The 

SHIFT 

button is a “toggle” button. I.E. press and

release it to get into shifted operation, press and release
again to get back out. The red Indicator is on when you
are in “shifted” mode.

The shifted functions are those labeled in red, i.e.

MENU

, 

QUIT

, 

OK

, and the navigation keys. When not in

Shift these buttons operate respectively as 

INFO

,

SLEEP

, 

MUTE (M)

, 

CHAPTER/CHAN UP/DOWN

 and

VOLUME UP/DOWN

. The non-shifted functions are

those labeled in Black or Blue.

To access the shifted “red” functions, press and release

SHIFT

. The red Indicator will stay on while in Shift mode

and blinks off briefly for any subsequent button press.
Press and release desired button labeled in red for that
function. To exit Shifted operation, press and release the

SHIFT 

button. Note the remote will automatically time-

out from Shifted mode if no button is pressed for
approximately 15 seconds.

To access the following functions in SAT or DVD
Modes, press 

SHIFT 

first.

MENU 

button brings up the Menu screen - use with the

UP

, 

DOWN

, 

LEFT 

and 

RIGHT 

navigation buttons.

OK 

button is used for on-screen Menu selection.

QUIT 

button is used to Exit or Clear on-screen Menu

displays.

Button Functions, cont.

The 

SLEEP 

button operates the Sleep function of your

device providing it supports the Sleep function.
Alternatively, you can enable the remote to turn off
your TV after a period of 1 to 99 minutes as shown
below. This feature is only available for the TV Mode
and the remote must be in TV Mode to set a Sleep
Timer. This feature works even if your TV does not
have its own Sleep function.

1. Press and release the TV Mode button.
2. Press and hold the 

CODE SEARCH

 button until the

red indicator stays on. Release the 

CODE SEARCH

button.

3. Press and release the 

SLEEP 

button (Note any

previously set Sleep timer is cancelled at this point
and the remote returns to normal operation).

4. Press and release the numeric buttons (

01-99

) for

the time required. The red indicator blinks off to
indicate button press acceptance and remains off
after the second button press.

5. TV Sleep Timer now set.

6. Leave the Remote pointing towards the TV with an

unobstructed path.

To cancel the Sleep Timer, press and release the

POWER 

button in TV Mode or repeat Steps 1, 2 and 3

above.