Before Use
17
Audio/Video Connection
The picture and sound of a nearby TV, VCR, or radio may be
distorted during playback. If this occurs, position the player
away from the TV, VCR, or radio, or turn off the unit after
removing the disc.
DVD Player Connections
Depending on your TV and other equipment there are various
ways you can connect the player. Please refer to the manuals
of your TV, stereo system or other devices as necessary for
additional connection information.
Video and Audio Connections to Your TV
Make sure the DVD player is connected directly to the TV and
not to a VCR, otherwise the DVD image could be distorted by
the copy protection system.
Video
:
Connect the VIDEO jack on the DVD player to the video in
jack on the TV using the video cable.
Audio Connection to Your TV:
Connect the AUDIO jacks of the DVD Player to the audio left
and right IN jacks on the TV using the audio cables. Do not
connect the DVD Player’s AUDIO OUT jack to the phone in jack
(record deck) of your audio system.
You must set the AV IN/DVD switch to the “DVD” mode
