11
1-800-892-3986
IS072S1-I2
Permanent Mount
•
Secure the shower rod to the walls by twisting the end of the
7/8 in. diameter tube assembly (C
) away from
you, until snug.
NOTE:
Make sure rod is level.
•
Once the rod assembly is secure, twist the tubes until tight.
• Complete mounting by tightening mounting screws (8) into the wall anchors (7) or studs.
• Align the dimples on the end caps (E) with the notches on the mounting brackets (A) and (B) and snap together,
as shown.
Step 8 - Installing the Rod Assembly in its final location.
C
B
twist the tube
AWAY
from you until snug
notch
E
B
dimples
notch
8
8
