DALIBOX Interface 64/32
Technical Support:
13
2.1
GENERAL CONFIGURATION
The general configuration of DALIBOX Interface 64/32 basically consists in defining the
dimming times
. They are the length of the transition from switched off (0%) to the
maximum luminosity level (100%), which determines the speed of the regulation.
Up to
three different dimming times
can be applied to the different orders or actions, and
their values may be changed through three communication objects (one per each
dimming time).
In case of configuring
dimming limits
(see section 2.5.3), the dimming times will be
applied as follows:
Transitions between 0% and the minimum dimming value will be
instantaneous.
Transitions between the minimum dimming value and the maximum dimming
value will take the proportional part of the parameterised dimming time (which
must be understood as the time corresponding to the entire transition from 0%
to 100%).
Moreover, the general configuration allows enabling the following functions:
Scenes
. See section 2.6.
Sequences
. See section 2.7.
Error Objects
. See section 0.
Standby
. See section 2.1.2.
Heartbeat
or periodical “still-alive” notification.
ECG Automatic Detection
: DALIBOX Interface 64/32 is able to detect new
ballast which are just connected to the DALI line, whether or not they have an
individual address associated, as well as carrying out monitoring of those
ballasts with an individual address detected. This functionality can be disabled
through the
object “
ECG Automatic Detection
” or through the display’s
submenu (see section 2.8.3).
