DALIBOX Interface 64/32
Technical Support:
7
1.2
INSTALLATION
DALIBOX Interface 64/32
connects to the KNX bus through the on-board KNX
connector. Once the device is provided with power from the KNX bus, both the individual
address and the associated application program can be downloaded.
Figure 1.
Element Diagram.
The main elements of the device are described next:
Prog./Test button
(7): a short press on this button sets the device into the
programming mode, making the associated LED (6) light in red.
Note
:
if this button is held while plugging the device into the KNX bus, the
device will enter into safe mode. In such case, the LED will blink in red every
0.5 seconds
.
DALI bus output
(1): slot for the connection of the DALI bus wires.
Neutral and Phase Inputs
(5): slots for the connection of the neutral and the
phase of the power line.
Display
(2): 128x64-pixel screen that provides information about the device
and the DALI system and allows the execution of different actions.
Control buttons
(3): directional arrows (
←↑→↓
), confirmation button (
OK
) and
exit button (
ESC
) that allow browsing through the options on the display.
1. DALI bus output.
2. Display.
3. Control buttons.
4. Power supply indicator LED.
5. External power supply.
6. Prog./Test indicator LED.
7. Prog./Test button.
8. KNX connector.
