DALIBOX Broadcast 6CH/4CH
http://www.zennio.com
Soporte técnico:
http://support.zennio.com
18
addition, in case of selecting the latter, it is possible to select whether a
second
switch-on order
should set the maximum dimming value.
ETS PARAMETERISATION
The following parameters are available in the “Switch On/Off” tab:
Figure 6.
Channel “x”. Switch On/Off
Switch On/Off (1 bit)
:
Switch On Value
: allows selecting the general dimming level that will be
adopted by the channel when the value “1” is received through “
[Ch]
On/Off
”. It can be “Last On Value” (default option) or “Defined Value”.
•
In case of selecting “Last On Value”:
o
Reach Maximum after a Switch On Order if it’s Already On
:
enables or disables the option to switch to the maximum
dimming level through a second switch-on order.
•
In case of selecting “Defined Value”:
o
Value
: the available range is 0% to 100%.
On/Off Dimming Time
: “At Once” (option by default) or “Dimming Time
n
”
(with
n
=1,2,3). See section 2.2.1.
2.2.4
DIMMING
DALIBOX Broadcast 6CH / 4CH provides two general dimming modes besides the
general On/Off control:
Relative Dimming
: modifies the dimming level through orders to increment
or decrement it by fixed percentages (“1.6%”, “3.1%”, “6.3%”, “12.5%”, “25%”,
“50%” or “100%”), which will be added to or subtracted from the current
