DALIBOX Broadcast 6CH/4CH
http://www.zennio.com
Soporte técnico:
http://support.zennio.com
3
1
INTRODUCTION
1.1
DALIBOX BROADCAST 6CH
DALIBOX Broadcast 6CH and DALIBOX Broadcast 4CH are the KNX-DALI broadcast
gateways from Zennio. Featuring six and four DALI channels respectively, they are
intended for interconnection of the KNX and DALI buses, thus making it possible to
send broadcast control messages (i.e., addressed to all ballasts that may be present)
through the output channels, as well as to monitor the DALI installation.
Their main functions are:
General ballast control
through universal DALI.
Support for
up to 20 ballasts per channel
, and therefore
up to 120 ballasts
(6CH model) or
up to 80 ballasts
(4CH model) in total.
110V
or
230V
power supply.
Ballast swap
with automatic address re-assignment.
Light regulation with
customisable dimming
limits and times, or by manually
characterising the dimming curve.
Lock
function.
Timed actions
: simple timers, flashing sequences and automatic switch-off.
Scenes
and
sequences
,
Custom On/Off
controls,
Standby Mode
to help save power consumption in the ballasts by controlling
the power supply to the output channels.
Error detection and notification
: short circuit, overconsumption, power
failure, open circuit, ballast error and lamp failure.
Support for the
Burn-in
mode, required by certain lamps during the switch-on
in order to ensure an optimal life period.
