DALIBOX Broadcast 6CH/4CH
http://www.zennio.com
Soporte técnico:
http://support.zennio.com
30
DALIBOX Broadcast 6CH / 4CH offers
up to ten
configurable scenes / sequences per
channel.
ETS PARAMETERISATION
Once this function has been enabled, the following objects will show in ETS:
“
[Cx] Scenes/Sequences
” (one byte): will trigger the scene or sequence
whose scene number is received through the object (see below).
“
[Cx] Start/Stop Sequence
” (one bit): allows starting the last sequence
performed, or restarting the one currently running (by sending the value “1”),
as well as interrupting the current sequence (value “0”).
Note
:
the “[Cx] Start/Stop Sequence” object only applies to sequences, and
has no effect over static scenes. Moreover, after a download from ETS
(partial or complete), if the value “1” is sent through this object, DALIBOX
Broadcast 6CH / 4CH will trigger the first, non-static sequence parameterised
.
The “Scenes/Sequences” tab in ETS contains the following parameters:
Figure 15.
Channel “x”. Scenes/Sequences
Each scene / sequence activated from this screen will have a specific tab associated,
labelled as “
Scene/Sequence ‘n’
” and containing the following parameters: