DALIBOX Broadcast 6CH/4CH
http://www.zennio.com
Soporte técnico:
http://support.zennio.com
5
1.2
INSTALLATION
DALIBOX Broadcast 6CH / 4CH connects to the KNX bus through the on-board KNX
connector. Once the device is provided with power from the KNX bus, both the
individual address and the associated application program can be downloaded.
Figure 2.
Element Diagram.
The main elements of the device are described next:
Prog./Test Pushbutton
(5): a short press on this button sets the device into
the programming mode, making the associated LED (7) light in red.
Note
:
if this button is held while plugging the device into the KNX bus, the
device will enter into safe mode. In such case, the LED will blink in red every
0.5 seconds
.
Output Channels
(1): slots for the connection of the DALI bus wires.
Neutral and Phase Inputs
(2): slots for the connection of the neutral and the
phase of the power line.
To get detailed information about the technical features of the device, as well as on the
installation and security procedures, please refer to the corresponding
Datasheet
,
bundled with the original package of the device and also available at
www.zennio.com
.
1. DALI output channel.
2. External power supply.
3. DALI channel control button.
4. DALI channel status LED.
5. Prog./Test button.
6. External power supply LED.
7. Prog./Test LED.
8. KNX connector.
