DALIBOX Broadcast 6CH/4CH
http://www.zennio.com
Soporte técnico:
http://support.zennio.com
8
Initialization
: custom configuration of the initial status (upon the recovery of
the KNX bus power or after an ETS download or a restart) for each channel,
or either of an initial sending (immediate or delayed) of the status to the bus.
Error identification
: detection of anomalies that may affect the proper
operation of the device: power supply error, short circuit, ballast error, ballast
overload, open circuit or lamp failure.
Special operation modes
:
Standby
: mode that allows notifying an external actuator after switching
off a channel, so the power supply to the ballasts in such channel can be
interrupted, thus reducing the power consumption.
Auto Off
: mode that allows automatically switching off one channel,
provided that it remains steady under a certain, parameterisable dimming
threshold for more than a certain, parameterisable time period.
Burn-in
: mode that prevents the execution of dimming orders during a
certain, parameterisable time period after the switch-on of the ballast, with
the aim of stabilising the lamp response and of optimising its life time. This
feature may be required by certain lamp models.