ZENN
iO
AVANCE Y TECNOLOGÍA
vwww.zennio.com
9
9
3. ETS PARAMETERIZATION
For beginning with the parameterization of KES it is necessary, once the ETS programme
has been opened, to import the product database (version 1.0 of the application programme
KES
3xSingle-Phase
).
Next, the device must be added to the project where desired. Right-clicking on the name of the
device will display the “Edit parameters” option, which allows the parameterization itself.
In the following sections a detailed explanation about each of the different features of KES under
ETS can be found.
3.1. DEFAULT CONFIGURATION
When no particular parameterization has been defined yet, the device and its objects will
show as in Figure 3.1.
Figure 3.1. KES 3xSingle-Phase. Default topology
Objects
“Time” and “Date” can be seen in the list. They are intended to set the time and date of the
KES device by means of an external KNX clock. Their functionality and everything related to time
management will be detailed on
Annex I. Time management
.
“Global Reset” and “Global Request” can be found next. When enabled (by sending the value “1”),
the earlier will make every counter and every calculation reset to their default values, so every
object related to instant values, estimations, total values and average values that had been
parameterized will become zero, as well as every variable needed for calculating. In addition,
communication objects related to tariffs and the upper and lower limits will return to their original
