KLIC-DD v3
Technical Support:
19
Humid heating operation:
this operation permits to raise the temperature and
humidity.
The ways to active this operation are:
While in Heating mode, modifying the humidity adjust.
While in Ururu humidification mode, modifying the temperature setpoint.
Once Humid heating is operating, heating mode and a low humidity operation
point will be activated. Fan speed level is not modified, keeping its previous
value.
Sarara Drying Operation:
this operation permits to lower humidity (actually,
is the same functionality than Dry mode).
To activate Sarara Drying operation, there are available the next objects:
“
[AC] Sarara:
1-Bit object to activate or deactivate Sarara Drying
operation.
“
[AC] Sarara (Status)
”: 1-Bit object that provides Sarara Drying operation
status.
Once Sarara drying operation is activated, Dry mode and a low humidity
operation point will be established. Fan speed level will be set to Automatic and
temperature setpoint will not be accessible (in case of modifying temperature
setpoint while this mode is running, Sarara drying mode will be deactivated,
and Dry cooling mode, that will be explain after, will be activated).
Note
:
Activating Sarara drying operation involves activating Dry mode and vice
versa.
When deactivating Sarara drying operation (by sending “0” through its object)
or when sending “0%” humidity adjustment, the A/C unit will operate in Cooling
mode.
Dry cooling operation:
this operation permits to lower temperature and
humidity. The ways to active this operation are:
While in Cooling mode, modifying humidity adjust.
