KLIC-DD v3
Technical Support:
4
1
INTRODUCTION
1.1
KLIC-DD V3
KLIC-DD v3
from Zennio
is a gateway that provides
full-duplex
communication between
the KNX home automation system and
domestic range Daikin air-conditioning
systems
through the S21 port of interior units. KLIC-DD v3 adds component
improvements and electrical safety over the previous KLIC-DD3.
Because of this
bidirectional
communication, the air conditioning system can be
controlled from the home automation system in the same manner as it is through its own
controls. Moreover, the actual status of the unit can be monitored and periodically sent
to the KNX bus to inform other devices.
The most outstanding features of KLIC-DD v3 are:
Bidirectional control of domestic range Daikin A/C units through the
S21 port
of interior units.
Control of the
main functions
of the domestic range Daikin A/C unit: On/Off,
temperature, mode of operation, fan speed, swing of the flaps, etc
.
Error management
to handle specific error codes from the A/C unit itself as
well as any communication issues that may arise.
Up to
five scenes
.
Two analogue-digital inputs
, for the connection of temperature probes,
motion detectors or binary pushbuttons or switches.
10 customisable, multi-operation
logic functions
.
Heartbeat
or periodic “still-alive” notification.
