KLIC-DI SKY
http://www.zennio.com
Technical Support:
http://support.zennio.com
8
2
CONFIGURATION
2.1
BASIC CONTROL
KLIC-DI allows controlling and monitoring an air-conditioning unit the same way it
would be through the wired remote control provided with it.
Through the KNX bus, the following basic functionalities of the air conditioning unit can
be controlled:
ON/OFF
switch of the air-conditioning unit.
Temperature Setpoint
between 16 and 32 ºC.
Operation Mode
: Auto, Heat, Cool, Fan and Dry.
Fan Speed
: configuration of 2 or 3 speed levels.
These functionalities imply changes in the state of the machine, which are periodically
sent to KLIC-DI. When KLIC-DI receives from the machine a state different to the
previous one, it updates the status objects and sends them to the KNX bus.
2.2
ADVANCED FUNCTIONALITY
Apart from basic control functions over the air-conditioning system, KLIC-DI offers
other advanced functionalities that provide added value to the wired remote control:
Scene Configuration
: allows establishing a specific parameter combination
to be sent to the machine in order to generate a determined climate ambient.
KLIC-DI allows configuring up to 4 different scenes.
Temporary Switch-Off
: allows an automatic and temporary switch-off of the
machine (after a pre-established delay, if set up) when the communication
object associated to this function changes its value. A typical application of
this functionality is linking a window sensor to the automatic switch-off object,
which will make KLIC-DI switch the machine off while the window is open.
Important
:
check which levels are provided by the A/C unit
.
