KLIC-DI VRV
http://www.zennio.com
Technical Support:
http://support.zennio.com
7
Figure 3.
Connecting KLIC-DI to the P1/P2 bus with a wired remote control (slave mode)
Connection Diagram Legend
A
KLIC-DI
B
Wired control
C
A/C unit
P1-P2
Connection base for the A/C unit
1-2
Zennio input terminal
*
The wired remote control needs to work contrary to the mode
(slave/master) set for KLIC-DI. See section 2.2.
For detailed information about the technical features of KLIC-DI, as well as on security
and installation procedures, please refer to the device
Datasheet
, included within the
device packaging and also available at
http://www.zennio.com
. Reading the KLIC-DI
installation note
, available at the same website, is also encouraged.
Note
:
sections below this point will focus on the KLIC-DI VRV application program for
variable refrigerant volume machines, and its specific configuration. Please refer to the
KLIC-DI SKY user manual in case of running that particular application program
.
A/C System
Wired control