KLIC-FJ vT
Technical Support:
19
SCENES
Figure 15. A/C Gateway. Configuration. Scenes.
Scenes
:
allows setting up different scenes (up to 5), consisting each of them
in a set of orders to be sent to the A/C unit upon the reception of scene trigger
values through the KNX bus. See section 2.4.5.
2.4.2
SPEEDS
The Fan Speeds function allows sending the A/C unit orders to switch the ventilation
speed along the available levels. To that end, KLIC-FJ vT provides a
percentage
control.
In addition, KLIC-FJ vT allows activating the
automatic fan speed mode
, in case of
being available in the unit.
Referring to the user manual of the A/C unit is advisable prior to setting up these options.
ETS PARAMETRISATION
After enabling this function, the menu on the left will show a new tab named Fan,
containing the following parameters:
Number of Fan Speeds
:
allows specifying the number of the fan levels
distinguished by the A/C unit, which may be
3 or 4 levels
. This determines the
values of the "
[AC]
Speed: Percentage Control
”
and "
[AC]
Speed: Percentage
Figure 16. A/C Gateway. Speeds.
