KLIC-MITT v2
Technical Support:
10
Automatic off
, which allows an automatic and temporary switch-off of the
unit (after a pre-established delay, if desired) when the communication object
associated to this function is triggered due to a certain event.
Scenes
, which
allows defining specific climate control presets, to be sent to
the machine on the reception of scene orders from the KNX bus.
These functionalities imply changes in the state of the A/C unit, which therefore notifies
KLIC-MITT v2 periodically about the current state. When KLIC-MITT v2 is notified
about a change, it updates the
status objects
and sends them to the KNX bus. In
addition, KLIC-MITT v2 provides an
error management
function (see section 2.2.6),
which allows sending messages to the KNX bus in case the A/C unit reports any errors.
ETS PARAMETRIZATION
The
“Configuration” tab under AC Gateway provides the following parameters:
Figure 5.
AC Gateway Configuration