KLIC-MITTE
Technical Support:
3
1
INTRODUCTION
KLIC-MITTE
KLIC-MITTE
from Zennio
is a new gateway that provides full-duplex
communication
between the KNX home automation system and
Mitsubishi
Electric Ecodan
air-
conditioning
and hot water management systems through the IT Terminal interface.
Because of this
bidirectional
communication, the air conditioning system can be
controlled from the home automation system in the same manner as it is through its
own controls. Moreover, the actual status of the unit can be monitored and periodically
sent to the KNX bus to inform other devices.
The most outstanding features of KLIC-MITTE are:
Bidirectional control of Ecodan ME (Mitsubishi Electric) units through their
IT
Terminal connector
(CN105/CN92).
Control of the
main functions
of the Ecodan unit: On/Off, temperature, mode
of operation, etc.
Error management
to handle specific error codes from the unit itself as well
as any communication issues that may arise.
Two analogue-digital inputs
, for the connection of temperature probes,
motion detectors or binary pushbuttons or switches.
10 customisable, multi-operation
logic functions
.
Heartbeat
or periodic “still-alive” notification.
