KLIC-PA
Technical Support:
7
Note
:
The first sending after download or bus failure takes place with a delay
of up to 255 seconds, to prevent bus overload. The following sendings match
the period set
.
•
Inputs
[
disabled
/enabled
]:
enables or disables the “Inputs” tab in the tree on
the left. For more information, see section 2.2.
•
Logic Functions
[
disabled
/enabled
]:
enables or disables the “Logic Functions”
tab in the tree on the left. For more information, see section 2.3.
•
AC Gateway
[
enabled
]: entails all functions specific to KLIC-PA, relating to
communication with the A/C unit and management of the climate control
system. For more information, see section 2.4.
Regardless of the above parameters, the following objects are available by default:
•
“
[AC] On/Off
” and “
[AC] On/Off (Status)
”: allow switching on (value “1”) and
off (value “0”) the A/C unit or reading the current status, respectively.
•
“
[AC] Temperature Setpoint
” and “
[AC] Temperature Setpoint (Status)
”:
allow setting the desired temperature setpoint or reading the current value,
respectively. See section 2.4.1 for further options.
•
“[AC] Reference Temperature (Status)
”
:
allows receiving values of
temperature that the A/C unit are taken in account in order to execute the
control of temperature. See section 2.4.1 for further options.
•
“
[AC] Mode
” and “
[AC] Mode (Status)
”: allow setting the desired operation
mode (either Heating, Cooling, Fan or Dry) or reading the current mode,
respectively. See section 2.4.1 for further options.
•
“
[AC] S
peed: Percentage Control”
and “
[AC] Speed: Percentage Control
(Status)
”: allow establishing desired fan speed. See section 2.4.1 for further
options.
•
Several
error objects
. See section 2.4.4.
•
“
[AC] Operating Time (h)
”:
allow reading operating hours of the A/C unit. See
section 2.4.1 for further options.
