KLIC-SG vT
Technical Support:
10
Initial configuration
, which allows establishing the desired initial parameters
for the state of the A/C unit after programming or restarting the device.
Scenes
, which allows defining predefined climate control environments, to be
sent to the machine on the reception of scene orders from the KNX bus.
Operation time
, provides in hours and/or seconds the A/C unit operating time.
Wireless Remote Control Restriction
, which allows to disable wireless
controller.
Filter
, which allows to know the filter status of the A/C Unit.
Ionizer
, which allows to activate the air purification function.
These functionalities imply changes in the state of the A/C unit, which therefore notifies
KLIC-SG vT periodically about the current state. When KLIC-SG vT is notified about a
change, it updates the
status objects
and sends them to the KNX bus. In addition, KLIC-
SG vT provides an
error management
function (see section 2.2.5), which allows
sending messages to the KNX bus in case the A/C unit reports any errors.
Important:
the functionality parametrised in KLIC-SG vT shall match the available
functionality offered by the IDU, to prevent potential undesired behaviours
.
