KLIC-SG vT
Technical Support:
3
1
INTRODUCTION
1.1
KLIC-SG vT
KLIC-SG vT
from Zennio
is a gateway that enables
full-duplex
communication between
the KNX home automation system and
indoor range Samsung air-conditioning
systems
through the 2-wire connection provided by the latter.
Because of this
bidirectional
communication, the air conditioning system can be
controlled from the home automation system in the same manner as it is through its own
controls. Moreover, the actual status of the unit can be monitored and periodically sent
to the KNX bus to inform other devices.
The most outstanding features of KLIC-SG vT are:
Bidirectional control
of indoor Samsung A/C units (IDU) through the
connection wires provided F3/F4.
Control of the
main functions
of indoor Samsung A/C unit: On/Off,
temperature, mode of operation, fan speed, etc
.
Error management
to handle specific error codes from the A/C unit itself as
well as any communication issues that may arise.
2 analogue-digital inputs
, for the connection of temperature probes, motion
detectors or binary pushbuttons or switches.
10
customisable, multi-operation
logic functions
.
Up to
five scenes
.
Heartbeat
or periodic “still-alive” notification.
