![background image](http://html1.mh-extra.com/html/zennio/maxinbox-24-zio-mb24/maxinbox-24-zio-mb24_user-manual_3427366015.webp)
MAXinBOX 24
http://www.zennio.com
Technical Support:
http://support.zennio.com
15
2.5
SCENE TEMPORISATION
The scene temporisation allows imposing
delays over the scenes of the outputs
.
These delays are defined in parameters, and can be applied to the execution of one or
more scenes that may have been configured.
Please bear in mind that, as multiple delayed scenes can be configured for each
individual output / shutter channel / fan coil module, in case of receiving an order to
execute one of them when a previous temporisation is still pending for that output /
channel / module, such temporisation will be interrupted and only the delay and the
action of the new scene will be executed.
ETS PARAMETERISATION
Prior to setting the
scene temporisation
, it is necessary to have one or more scenes
configured in some of the outputs. When entering the Configuration window under
Scene Temporization, all configured scenes will be listed, together with a few
checkboxes to select which of them need to be temporised, as shown in Figure 66.
Figure 6.
Scene Temporisation
Enabling a certain scene number n brings a new tab with such name to the menu on
the left, from which it is possible to configure the temporisation of that scene for each of
the outputs where it has been configured.