![background image](http://html1.mh-extra.com/html/zennio/maxinbox-24-zio-mb24/maxinbox-24-zio-mb24_user-manual_3427366009.webp)
MAXinBOX 24
http://www.zennio.com
Technical Support:
http://support.zennio.com
9
2.2
OUTPUTS
The MAXinBOX 24 actuator incorporates
24 relay outputs
, which can be configured
as:
Individual binary outputs
, which allows an independent control of loads.
Shutter channels
, which allow controlling the motion of shutters or blinds.
Fan Coil modules
, which allow the control of the fan and the valve of two-
pipe fan coil units.
In particular:
MAXinBOX 24
: the 24 outputs are grouped into two-output channels, which
themselves are grouped into two-channel (or four-output) blocks. Therefore, it
is possible to configure up to 6 fan coil modules, or up to 12 shutter channels,
or up to 24 individual outputs.
For detailed information about the functionality and the configuration of the related
parameters, please refer to the following specific manuals, all of them available within
the MAXinBOX 24 product section at the Zennio website (
www.zennio.com
):
Individual outputs.
Shutter channels.
‘Relays’ Fan Coil.
Note that MAXinBOX 24 is only compatible with two-pipe
fan coils. Therefore, any references to four-pipe fan coils do not apply to this
device.