QUAD Plus
Technical Support:
3
1
INTRODUCTION
1.1
QUAD PLUS
QUAD Plus
is an updated, small-size version of the popular QUAD from Zennio. This
module incorporates four digital / analogue separate inputs, each configurable as:
Binary Input.
Temperature probe
, either models provided by Zennio or other NTC
temperature probes from other suppliers, being in that case possible to
configure their parameters in ETS.
Motion detector.
Moreover, QUAD Plus implements
four independent thermostats
, which can be
enabled and configured separately, as well as the Heartbeat function or periodical “still-
alive” notification.
1.2
INSTALLATION
QUAD is connected to the KNX bus through the incorporated terminal connector, while
the input lines need to be connected to QUAD Plus through the screw terminal block
bundled in the device packaging. Once powered through the KNX bus, the device may
be downloaded both an individual address or the application program.
Figure 1
QUAD Plus. Element diagram.
1.- Prog./Test LED.
2.- Prog./Test button.
3.- Inputs.
4.- Optional connector.
5.- KNX bus connector.
5
1
2
3
4
