QUAD Plus
Technical Support:
7
Notes
:
The ZN1IO-DETEC-P motion detector is compatible with a variety of Zennio
devices. However, depending on the device it is actually being connected to,
the functionality may differ slightly. Therefore, please refer specifically to the
aforementioned user manual.
Motion detectors with references ZN1IO-DETEC and ZN1IO-DETEC-N are
not compatible with QUAD Plus (may report inaccurate measurements if
connected to this device).
When connected to QUAD Plus, the rear micro-switch of model ZN1IO-
DETEC-P should be set to position “Type B”
.