Z41 COM + Zennio GetFace IP Configuration Guide
Tecnical Support
14
3.1.2
GETFACE IP CONFIGURATION
The configuration of GetFace IP is
the
same as indicated in section 2.2
the following in the Users section:
1.
Directorio
Usuarios:
add user.
Figure 10
GetFace IP - Add user
Number 1
:
1.1.
Phone number:
the format should be
sip:id@[IPaddress]
. The “id” will only be
used to identify calls in the event log in the state section. In
IP address
, the IP
address of a Z41 COM must be indicated. Example:
sip:1@192.168.1.101
.
IMPORTANT:
The IP address must be the same configured by parameter in
Z41 COM (item 1.1 in section 2.1).
1.2.
Parallel call to following number
: check to add the IP address of the next
Z41 COM to call in parallel.
Number 2
:
