Z41 COM + Zennio GetFace IP Configuration Guide
Tecnical Support
18
3.3
DOORS
There are many configurations for opening doors, it can be done through a binary KNX,
a HTTP command or both of them.
3.3.1
Z41 COM CONFIGURATION
The configuration of Z41 COM is
the
same as indicated in section 2.1
, but also, it is
necessary to configure:
1.
In “
Outdoor Unit 1
”, in the tab “
Configuration
”:
1.1.
Number of Doors
: up to 3 doors per Video Intercom.
1.2.
HTTP Command
: the order to open a door will be sent via a HTTP command.
This must be the option selected is lock control is performed from GetFace IP.
When enabled, the following parameters appear:
1.2.1.
Secure Opening
: allows setting a
username
and
password
required to
send through the HTTP command to open de door in order to increase the
security.
1.3.
KNX Object
: the order to open a door will be sent via a binary communication
object. It is possible to choose the
value of the object
that will open the door.
Figure 14
Z41 COM - Doors Configuration
