Square TMD
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
44
Table 1 illustrates which of the above are configurable for each function.
Disabled
Regular
State-dep.
State-dep.
(both LEDs)
Dedicated
object
PAIR
Switch
Two Objects
Dimmer
Shutter
INDIVIDUAL
LED Indicator
Switch
Hold & Release
Two Objects
Scene
Constants
Dimmer
Shutter
DISABLED
Table 1
Functions vs. LED Illumination Options.
Note
:
Regarding the LEDs, it is interesting to distinguish the following cases
:
Disabled button
:
the LED will remain off, and the button will have no function.
Button configured as “Individual” with “LED Indicator” function: the button will
still have no function. The LED may be turned on/off through a binary object.
Button configured as any other control type: the behaviour of the LED will be
configurable according to the following table (being also possible to leave it
turned off).
Although the behaviour of the LEDs can be configured independently for each control,
it is also possible to define a
general behaviour for all of them
(see section 2.3.1)
thus not being then necessary to configure the same option multiple times. In case of
opting for a general configuration, the options are: