Square TMD-Display
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
21
non-enabled language, the main language will be activated. When the
received value is out of range, the active language remains unchanged.
A
two-byte ASCII object
. The values expected by this object are two ASCII
code characters corresponding to the ISO 639-1 standard. When receiving
the value of a non-enabled language, the main language is selected.
Note
:
please refer to
http://en.wikipedia.org/wiki/List_of_ISO_639-1_codes
for a table with the language codes.
ETS PARAMETERISATION
After enabling “
Translations
” in the “Advanced” configuration screen (see section
2.2.6), a new tab will be incorporated into the tree on the left.
Figure 13
General – Translations.
This screen contains the following parameters:
Main language
: read-only parameter to make it evident that the main
language is always enabled.
Select language
: list of the available languages.
Language X
:
enables or disables the additional language X.
Select language
: list of available languages to select the language X.
Only the Main language is enabled by default.
While Translations stays enabled, the following objects are visible:
“
[General] Translations – Select language
” (one-byte).
“
[General] Translations – Main language
” (one-bit).
