Square TMD-Display
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
81
Figure 68
Display – Box a1.
2.4.5
BORDERS
Divisions between the boxes can be drawn in three different styles: with
solid lines
,
dashed
(dotted), or
invisible
(without division line). This configuration may be common
to all lines or separate for each, as shown in Figure 69.
Figure 69
Borders – Different configuration for each border.
ETS PARAMETERISATION
After selecting “Customize every border” in the
Border lines
parameter (see section
2.4.1), a new tab will be incorporated into the tree on the left.
To simplify the configuration, this screen is divided into three parts (see Figure 70):
Upper lines (vertical)
: configures the upper vertical lines
a1-a2
,
a2-b1
and
b1-b2
.
Middle lines (horizontal)
: configures the middle horizontal lines
a1-c1
,
a2-
c2
,
b1-d1
and
b2-d2
.