3
4
■
ENGINE
•
Using attached 4 socket screws, secure the
connection firmly with equal force.
B: BC3500WE/BC4500WE/BC530WE
1. BC530WE only remove the screw(1) from
the right grip(2) and put the grip onto the
right handle. Align the positioning holes and
put the screw through them. Fasten the
clamp(3).
2. Remove the upper cap from the bracket.
3. Loosen the 4 bolts on the clamp and insert
the handles equally.
Retighten the bolts.
4. Put the handle assembly into the bracket
and put the upper cap over it. Tighten the
cap securely.
■
CONNECTING THROTTLE WIRE
[BC2300LE/BC2600LE/BC3500WE/BC4500WE]
1. Remove the air cleaner cover.
2. Connect the end of the throttle wire to the
joint on the top of the carburetor.
■
PROTECTOR
•
Wrap the protector around the outer pipe as
shown in the figure, and fasten the magic
fastener.
■
BLADE GUARD
A: BC2300LE/BC2600LE/BC530WE
•
Attach the guard to the bracket and fix it
with 4 screws and nuts.
B: BC3500WE/BC4500WE
•
Attach the guard to the clamp on the outer
pipe just touching the gearcase. Fix it with 2
bolts.
■
BLADE
1. Put the angled bar(1) into the side holes of
the inner holder (4) and the gearcase.
2. Remove the blade bolt(2, Left-handed) and
the outer holder (3) from the gearshaft.
3. Put the blade onto the inner holder.
4. Put the outer holder onto the gearshaft
making the recessed side face the blade.
5. Fasten the blade by the blade bolt with the
washers(5) and the bolt cover(6).
Setup
Fuel
• Keep open flames away from the
area where fuel is handled or stored.
• Mix and store fuel only in an
approved gasoline container.
•
Mix a regular grade gasoline (Ieaded or
unleaded, alcohol-free) and a quality-proven
motor oil for air cooled 2-stroke gasoline
engine use.
25 : I Mix Chart
Gasoline liter
1
2
3
4
5
2-cycle oil ml. 40
80
120
160
200
Recommended mixing ratio:
Term Gasoline:
Oil
Upto 20 use hours
20 : 1
After 20 use hours
25 : 1
NOTE:
Most engine troubles are caused, directly or
indirectly, by the fuel used on the machine.
Take special care not to mix a motor oil for 4-
stroke engine use.
BC2300LE
BC2600LE
BC3500WE
BC4500WE
BC2300LE
BC2600LE
BC530WE
BC530WE
BC3500WE
BC4500WE
BC530WE
BC3500WE
BC4500WE
BC530WE
■
HANDLE
A: BC2300LE/BC2600LE
•
Put the handle onto the main pipe and fix it
with 4 screws.