background image

GB-5

BK3420FL-EZ

G

B

1.  Read  this  manual  carefully 

until  you  completely  under-
stand and follow all safety and 
operating instructions. 

2.  Keep  this  manual  handy  so 

that  you  may  refer  to  it  later 
whenever any questions arise. 
Also  note,  if  you  have  any 
questions  which  cannot  be 
answered herein, contact the 
dealer  from  whom  you  pur-
chased the product.

3.  Always be sure to include this 

manual when selling, lending, 
or  otherwise  transferring  the 
ownership of this product.

4.  Never allow children or any-

one unable to fully understand 
the  directions  given  in  the 
manual to use the machine.

 WORKING CONDITION

1.  When  using  the  product,  you 

should wear proper clothing and 
protective equipment.

(1) Helmet
(2) Ear protectors
(3) Protection  goggles  or  face 

protector

(4) Thick work gloves
(5) Non-slip-sole work boots

2.  And you should carry with you.
(1) Attached tools 
(2) Properly reserved fuel
(3) Spare blade
(4) Things  to  notify  your  working 

area (rope, warning signs)

(5) Whistle  (for  collaboration  or 

emergency)

(6) Hatchet or saw (for removal of 

obstacles)

3.  Do not wear loose clothing, jew-

elry,  short  trousers,  sandals,  or 
go  barefoot.  Do  not  wear  any-
thing which might be caught by 
a moving part of the unit. Secure 
hair  so  it  is  above  shoulder 
length.

 WORKING CIRCUMSTANCE

1.  Never start the engine inside a 

closed room or building. Exhaust 
gases contain dangerous carbon 
monoxide. 

2.  Never use the product,
(1) When the ground is slippery or 

when  you  can’t  maintain  a 
steady posture.

(2) At night, at times of heavy fog, 

or at any other times when your 
field  of  vision  might  be  limited 
and it would be difficult to gain 
a  clear  view  of  the  working 
area. 

(3) During rain storms, during light-

ning storms, at times of strong 
or  gale-force  winds,  or  at  any 
other times when weather condi-
tions might make it unsafe to use 
the product.

 WORKING PLAN

1.  You should never use the product 

when under the influence of al-
cohol,  when  suffering  from  ex-
haustion or lack of sleep, when 
suffering  from  drowsiness  as  a 
result of having taken cold med-
icine or at any other time when a 
possibility exists that your judg-
ment might be impaired or that 
you might not be able to operate 
the  product  properly  and  in  a 
safe manner.

2.  When planning your work sched-

ule, allow plenty of time to rest. 
Limit  the  amount  of  time  over 
which the product is to be used 
continuously  to  somewhere 
around 30 ~ 40 minutes per ses-
sion, and take 10 ~ 20 minutes 
of  rest  between  work  sessions. 
Also try to keep the total amount 
of work performed in a single day 
under 2 hours or less.

WARNING

1.  If you don’t observe the working 

time,  or  working  manner  (

See 

“USING THE PRODUCT”

), Re-

petitive Stress Injury (RSI) could 
occur.

  If  you  feel  discomfort,  redness 

and  swelling  of  your  fingers  or 
any other part of your body, see 
a doctor before getting worse.

2.  To  avoid  noise  complaints,  in 

general,  operate  product  be-
tween  8  a.m.  and  5  p.m.  on 
weekdays and 9 a.m. to 5 p.m. 
on weekends.

 5. For safe operation

01-BK3420FL-EZ_GB_207_三.indd   5

12.9.21   1:24:10 PM

Summary of Contents for BK3420FL-EZ























Reviews: