3. SAFETY PRECAUTIONS
persons, always check the
presence and locations of others
so as to maintain a distance each
person sufficient to ensure safety.
c. Make sure that there are no loose
screws or bolts, fuel leaks,
ruptures, dents, or any other
problems which might interfere
with safe operation. Be especially
careful to check that there is
nothing wrong with the blades or
with the joints by which the blades
are attached to the hedge-
trimmer.
d. Never use blades that are bent,
warped, cracked, broken or
damaged in any way.
e. Keep the blade always sharp.
f. Filing the cutting edges, keep the
end corner sharp and round the
root of the edge.
g. Check the bolt to fasten the blade
and be sure the blade turns
smoothly without abnormal noise.
■
NOTES ON STARTING THE
ENGINE
1. Take a careful look around to
make sure that no obstacles exist
within a perimeter of 15m or less
around hedge-trimmer.
2. Place the body of the hedge-
trimmer onto the ground in a flat
clear area and hold it firmly in
place so as to ensure that neither
the blades nor the throttle come
into contact with any obstacles
when the engine starts up.
3. Place the throttle into the idling
position when starting the engine.
4. After starting up the engine, if the
blades continue to rotate even
after the throttle has been moved
fully back, turn off the engine and
check the throttle wire and other
parts.
English
14
Summary of Contents for eHT600D
