30
– English
Repair instructions
7.7 Dismantling the ignition module
and flywheel
1
Loosen the starter with the screws A and B (four
screws).
Fig 9
Fig 10
2
Loosen the screws D and remove the entire igni-
tion module. Remove the spacers between the
cylinder and the ignition coil, see figure 11. Loosen
the electrical cable E and the earthing cable F from
the ignition module C.
Fig 12
3
Unscrew the spark plug and screw in the piston
stop G.
Fig 13
4
Loosen flywheel nut H with a suitable socket span-
ner and then remove the nut, see figures 12 and
13.
5
Knock on the mandrel J with a suitable metal ham-
mer until the flywheel comes off from the shaft.
Remove mandrel and flywheel, see figure 13.
Cleaning and checking
•
Clean all parts, especially the tapers on the
flywheel and shafts.
•
Check the flywheel for cracks and any other da-
mage.
Fig 11
Summary of Contents for GZ3500T
Page 1: ...Workshop Manual English GZ3500T...
Page 2: ......
Page 12: ...12 English 4 Service tools Service tools 11 4 6 9 1 3 7 8 10 5 2...
Page 15: ...English 15 Service data...
