MUGL
Page 2 of 38
rev. 18 November 2009
Converter series FVC
The converter FVC series are static AC/AC three-phase devices with double
conversion and IGBT technology under microprocessor control. They supply the load
with variable voltage and frequency at the set value regardless of impedance
value
and mains fluctuations.
The information about voltage and current supplied is shown by means of 7
segments displays.
They can be controlled by external signals.
They are equipped with RS485 serial interface.
They can have two output scales so to supply the maximum power at two different
full-scales.
Product presentation
According to the output power, the equipment can be assembled in:
table rack
recessed rack
metal cabinet
Control interface
commands and connections
voltage setting command and visualization:
on front panel
frequency setting command and visualization:
on front panel
logical command for output-on:
on front panel
selection for local/remote commands:
from RS485 serial interface
line breaker:
on front panel
RS485 serial interface:
on front panel
mains supply:
from cable on the back side (rack version)
on terminal blocks inside the cabinet (metal
cabinet version)
outputs:
on front panel jacks or bars (rack version)
on terminal blocks inside the cabinet (metal
cabinet version)
emergency input:
on front panel
auxiliary inputs/outputs
on front panel
F
