BRIEFCASE ALARM
INSTRUCTION SHEET
It is a mini Briefcase Alarm equipped with a keypad to set your personal secret code.
It detects Un-authorized movements to your Briefcase and/or other valuable belongings
There are three different alarm sounds and alarm time settings for you to select.
Installation & Operation
Battery Installation
1. Unscrew the battery cover on the back of the Briefcase Alarm
2. Follow the polarity instructions
inside the battery
compartment and install 3pcs of fresh AG13/1.5V batteries
(Included).
3. Replace the battery cover and screw
How to Set The Personal Secret Code?
1. After installing 3pcs of AG13/1.5V batteries, the RED LED will flash continuously
2. Choose a 4-digit secret code and then press this code on the front panel buttons of Briefcase Alarm.
Please DO NOT includes F as your secret code. ONLY use digits as your secret code. For example, 1111
or 1231...etc.
3. After pressing the selected 4-digit secrete code, you will hear 4 beeps and RED LED will stop flashing.
At this point the secret code has been successfully set
How to Change/Unset the Personal Secret Code?
1. Make sure the Briefcase Alarm is not in ARMED mode
2. Press F and the present 4-digit Secrete Code
3. Your will hear 4 short beeps and see the RED LED flash continuously
4. Press a new 4-digit Secrete Code and 4 long beeps will sound to indicate that the new 4-digit Secrete
Code has successfully been set.
5. If the new 4-digit Secrete Code is not keyed-in within 5 seconds or within the time period of RED LED
flashes, the new 4-digit code will not be successfully set and you will need to restart the
Changing/Unset secrete code process again.
How to ARM/DISARM the Briefcase Alarm?
1. Press F twice and you will see the RED LED flash for 5 seconds. The Briefcase Alarm will then be in
ARMED mode
2. If you press F & the correct 4-digit Secret Code, you will hear two beeps and the alarm will have been
disarmed successfully
3. If the incorrect Secret Code is keyed-in, two brief warning beeps will sound, you can continuously
key-in the correct 4-digit Secrete Code without pressing F
4. If your 4-digit Secret Code is incorrectly keyed-in 3 times in a row, the alarm will sound automatically
How to Use the Briefcase Alarm?
1. After arming the Briefcase Alarm, the unit will be able to detect the vibrations and/or movements to
your belongings. A Bi-Bi tone will sound to alert users that someone is moving the Briefcase Alarm. If
there is no vibration / movement within the next 2 seconds, the unit will return to the ARMED mode
2. If the unit continuously detects two or more vibrations/movements within a 2 second period, then an
alarm will go sound following a 3 second delay period
3. Follow the above instruction to DISARM the alarm
