Note:
-
While setting if no buttons is pressed after few seconds the clock will automatically exit the setting
mode.
Alarm Music & Rolling Function
-
Alarm Music Selection
- This clock has a built in 10 different music alarms. The selected music will be played
when the alarm time is reached.
-
Rolling Function
– The clock has a rolling function where the clock will roll on to the cradle when the alarm time
is reached. This function can be turned ON or OFF when setting the alarm.
This function may result in clock
rolling off from the cradle to floor which is normal. This is a design feature as it forces you to pick up
the clock and put back onto the cradle.
Setting the Alarm Music
1. Press
Key A
to select the alarm music mode, flashing music note icon
will be displayed.
2. Press and hold
Key A
for 3 seconds to enter the alarm music setting mode. The music note icon
will stay
static and the digits
will flash.
3. Press
Key B1 or B2
to select desired alarm music.
4. Finally to confirm your selection press and hold
Key A,
the music digit will be static and the music note icon
will flash. After 5 seconds the music note icon
will automatically stop flashing and display will return to
normal time display.
Alarm Setting
1. Press
Key A
to select Alarm setting mode, flashing bell icon
will be displayed.
2. Press and hold
Key A
for 3 seconds to enter alarm setting mode. The bell icon
will stay static and hour digits
will flash.
3. Press
Key B1 or B2
to set hours.
4. Press
Key A
to move to the minutes setting and minute digits
will flash.
5. Press
Key B1 or B2
to set the minutes.
6. Press
Key A
to move to AM/PM setting, AM/PM icon will flash.
7. Press
Key B1 or B2
to set time to
AM
or
PM.
8. Press
Key A
to move to rolling setting, rolling icon
will flash.
9. Press
Key B1 or B2
to set the rolling feature to ON or OFF.
10. Press
Key A
to confirm all setting.
11. Finally press and hold
Key A
to complete setting and after few seconds the bell icon
will automatically stop
flashing and display will return to normal time display.
