866-937-4971
info@zephyrlock.com
2.2
Permanent Use (Pre-Assigned Mode)
•
2154 / 2155 allows Administrator to assign specific User Card to locker
•
2254 / 2255 allows User to select their own personal 4-digit passcode
•
Control Card sets passcode back to default 1-2-3-4. Can also assign new User Card or delete old User
Card from lock
•
Manager Card gives User supervisory access without removing existing 4-digit passcode or assigned User
Card.
2.3
Custom Programming
•
The 2154 / 2254 & 2254 / 2255 RFID locks have many custom programming features such as time-based
operation, zone-based Control Cards, and audit trail.
3.
Basic Operation of the Locks
3.1
Permanent Use Mode
•
Open & Close by 4-Digit Passcode: (2254 / 2255 only)
1.
Default Passcode: 1-2-3-4
2.
Press “ZEPHYR” button plus 4-digit passcode then “ZEPHYR” button again
3.
Close – Lock bolt automatically re-engages after several seconds.
•
To change Passcode:
1.
Press “ZEPHYR” button plus old passcode,
2.
Press “ZEPHYR” button again plus new passcode
3.
Repeat: press “ZEPHYR” button plus new passcode then “ZEPHYR” button again
o
Note: Passcode can be changed only when the lock is unlocked
•
Open & Close using the RF Card Key (2154 / 2155 & 2254 / 2255)
•
For the 2154 / 2155
o
Press “ZEPHYR” Button and touch the User Card to the lock face.
•
For the 2254 / 2255:
1.
The RF Card Key can be used instead of the keypad if desired:
2.
Press “ZEPHYR” Button and touch the User Card to the lock face.
a.
When the user selects to operate by the RF Card Key (2254 / 2255), the default
passcode 1-2-3-4 will be erased from the lock; However, the User passcode and the
default passcode will not be deleted.
b.
When the user wants to set a new passcode (2254 / 2255), the process is the same
as in “Change Passcode” while the lock is in the unlocked position. The default
passcode 1-2-3-4 cannot be used as a user passcode.
c.
When the Control Card is used, the User passcode will be set back to the default
passcode: 1-2-3-4
3.2
Day use Mode
•
Open & Close by Passcode: (2154 / 2155 & 2254 / 2255)
1.
To Close: Press “ZEPHYR” button plus self-selected 4-digit passcode then “ZEPHYR” button
again
2.
To Open: Press ZEPHYR” button plus the same 4-digit passcode then “ZEPHYR” button again;
The bolt stays open, and the previous passcode is erased.
•
Open & Close by RF Card Key: (2154 / 2155)
1.
To Close: Press “ZEPHYR” button and touch the User Card to the lock face.
2.
To Open: Press ZEPHYR” button plus the same 4-digit passcode then “ZEPHYR” button again;
The bolt stays open, and the previous passcode is erased
4.
Note: After it is unlocked, any 4-digit password can be used to lock it. The User Passcode will be deleted each time
the lock is opened.
