COMPONENTS
1.MAIN UNIT
2.BASE
3.SCREW (2pz)
4.TIP OVER SWITHC
5.ELECTRIC CABLE
6.PLUG
ASSEMBLY
Assemble the central body and the base together as described:
• Remove the two
screws from the bottom of the base.
• Insert the power cable through the slot in the central part of the base and then assemble the body to the base
• Attach the body to the base by tightening the two
screws previously removed.
OPERATIONS
Open the base by rotating it , place the device in a flat, stable surface , so that the safety switch can work Connect the
plug to a wall socket.
CONTROL PANEL
Select the desired heating power.
Press the orange button to operate.
The device in this mode generates 400W.
Press the following white buttons to select 800W and 1200W respectively.
By pressing the button " Turn" you can enable or disable the oscillation.
SAFETY DEVICES