Connected to power outlet. (Take note that the shaver should be placed upright when
charging to avoid unwanted damages)
HOW TO USE
1.
Remove the cover and push the On/Off switch upward to turn on the shaver.
2.
Stretch your skin with the free hand and hold the shaver at a right angle to the skin. Gently shave over the desired
area.
3.
When shaving, be sure not to apply too much pressure to avoid injuries to your skin. You may require a little time to
get used to the new shaving method of our product.
4.
After you have finished shaving, turn off the shaver and replace the cover.
4.
After you have finished shaving, turn off the shaver and replace the cover.
HOW TO REPLACE OUTER FOILS AND INNER BLADES
1.
Turn the On/Off switch off before replacing the outer foil.
2.
Detach the outer foil hood. Hold on the foil with the fingers at the points indicated as (1) and (2) in the diagram and
2.
Detach the outer foil hood. Hold on the foil with the fingers at the points indicated as (1) and (2) in the diagram and
pull out. Repeat the same on opposite side to completely release the foil.
3.
To insert a new outer foil, slightly bend the foil inward and place down until it is parallel.
4.
Hold firmly at both ends of the inner blades and pull upward to detach the blades.
5.
Hold both ends of the new inner blades and press downward until it snaps into the shaver.
