DESCRIPTION
1.
Switch
2.
Body
3.
Cover
4.
Cup
5.
Knife
6.
Non-slip mat
IMPORTANT
Do not run the super chopper continuously for longer than 10 seconds. Leave to cool for 1 minute in between each
10 second operation.
Do not operate the super chopper if the bowl is empty.
Never operate the super chopper with the bowl filled with liquid.
BEFORE USE
Make sure your electricity supply is the same ad the one shown on the underside of the power unit.
Remove all packaging including the plastic blade covers from the knife blade. These covers should be discarded as
they are to protect the blade during manufacture and transit only.
Wash the parts: see “cleaning”.
TO USE THE FOOD CHOPPER
1.
Place the non slip mat onto the work-surface, rib side down.
2.
Position the bowl onto the middle of the non slip mat.
3.
Fit the knife blade over the pin in the bowl.
4.
Add your food, see processing guide.
Cut large pieced of food into 1-2 cm (1/2-3/4 in pieces).
Don’t chop hard foods such as coffee beans, ice cubes, spices or chocolate-you’ll damage the blade.
5.
Fit the splashguard. Make sure the slots in the splashguard fit over the handles in the rim of the bowl.
The super chopper will not operate unless the splashguard in fitted.
6.
Fit the power unit.
The power unit will only fit correctly in two positions.
7.
Plug in. press down on the power unit for short lengths of time to produce a pulsing action-this will avoid over
processing the ingredients.
If the machine labors, remove some of the mixture and continue processing in several batches.
Stop the machine and scrape down if necessary.
Do not run the super chopper continuously for longer than 10 seconds. Leave to cool for 1 minute in between
each 10 seconds operation.
8.
After use. Unplug and dismantle.
