22
PRB15C01CG Use, Care, and Installation Guide
B E V E R A G E
C O O L E R
S I N G L E Z O N E
P R E S R V ™
Operating Your Appliance
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the appliance may not start and will not keep the
last set temperature.
Using the Control Panel
This beverage cooler has a temperature range from 34ºF-50ºF.
Power Button
Press and hold this button for three seconds to power your unit on or off. While the unit is on,
the R “Compressor Running” light may illuminate to indicate the internal compressor is active.
After powering off, all button lights will stay off. Once any button is touched, the power button
will illuminate for five seconds.
ºC/ºF Selector
Press this button to switch the display temperature between Fahrenheit and Celsius.
Decrease Temperature
Press this button to decrease the temperature by one (1) degree increments. Holding this button
will continuously decrease the temperature. 34ºF is the lowest available temperature on this
unit.
Increase Temperature
Press this button to increase the temperature by one (1) degree increments. Holding this button
will continuously increase the temperature. 50ºF is the highest available temperature on this
unit.
Light Brightness
Press this button to cycle through different internal light brightness. The brightness increases
from L0 to L1, L2, L3, and L4, and it will decrease from L4 to L0. When at L0, the lights will not
turn on whether the door is opened or closed.
Interior Light
Press this button to cycle through the different internal light settings. There are three light
settings: Cloud White, Deep Blue and Amber.
NOTE:
The beverage cooler is equipped with a memory function. If power is suddenly lost, the
previous set temperature, color, and brightness will be saved, and the cooler will return
to this setting once power is restored.
F
C
