6. Insert the 6 pin female molex connector into the
junction box. See Fig. 6A. Secure remote blower
junction box to top of blower housing using (2)
screws. See Fig. 6B
7. Feed remote blower wire harness through remote
blower junction box cover and Connect the wires
with those inside the junction box. See Fig. 7
Note
: Carry out the power supplly connection in
accordance with the national electric
code, ANSI/NFPA 70-1999.
8.Secure cover to junction box using (2)
screws.
Note1
: A cable lock (not included) may
be required by local codes. Please
review local codes for more informa-
tion.
9. Attach 6 pin male molex connectors to 6 pin fe-
male molex connectors inside blower housing.
See Fig. 8
Note2
: Check local codes to determine minimum
wire gauge.
See manual included with external and in-line
blower for instructions on installing the blo-
wer.
Installa
tion - Ex
ternal & In-Line Blo
w
er P
repar
a
tion
- 13 -
