6
WHAT’S IN THE BOX
Table 1: The Macchiato Mini-Synth Bill Of Materials (BOM) is a complete parts list of everything that
should be present in your kit, followed by photos of each part. Print the BOM and carefully go through
the kit, identifying every part. Please read about the proper handling
of integrated circuits (ICs) in paragraph 7 on page 18 before
removing anything from the silver static-protective bag. Note that
some of the components are difficult to tell apart. Compare them
carefully with the photos. Besides verifying that nothing is
missing, this will acquaint you with the parts and their names. If
ANYTHING is missing, first double-check; we double-checked
before sealing the box at our lab! If it’s still missing, EMAIL US
right away at info@zeppelindesignlabs.com. If we goofed and
shorted your kit, we will get replacement parts in the mail to you as soon as possible. If you lose or
damage anything, we will be glad to sell you replacements. The unusual or custom components can be
ordered directly from us (contact info@zeppelindesignlabs.com). For more common parts, like resistors,
capacitors, or screws, you may prefer to go to a local electronics or hardware store.
TIP:
Empty the parts
of the kit into a bowl, NOT
onto the cluttered workbench, or
onto the living room carpet! This
will protect you from losing tiny
parts.
Figure 2: What’s In The Box
