Z 2500-130/150
48
Powering up the tail lift
www.zepro.com
Image 71.
C
onnection to the fuse box
1
2
3
4
7
Powering up the tail lift
1. If applicable, ensure that the main switch is in the "Off" position.
2. If applicable, ensure that the cab switch (CS) is in the "Off" position.
3. When using a fuse box, connect the cable (1) to the battery’s positive terminal and to the fuse box and place
the fuse (2) above, see
Image 71
.
4. When connecting directly to the positive battery terminal, place the fuse (2) on the positive terminal, see
Image 72
.
5. Connect the main power cable (3) to the fuse box / positive terminal, see
Image 71
-
Image 72
.
6.
Screw tight the cable connections and fuse with the knob (4). Install the cables at 90° or 180° from each
other. Install the fuse at right angles to the cables; see
Image 71
-
Image 72
.
IMPORTANT!
The knob must bear against and centre the cable lug so that it does not come into contact with the screw.
Incorrect installation can cause the fuse to be ineffective. Risk of fire in the event of a short circuit.
7. Install the fuse box cover.
8.
Where fitted, set the main switch to the ON position.
9.
Where fitted, set the cab switch to the ON position.
Image 72.
C
onnection to the bat-
tery's positive terminal
Image 73.
C
orrect installation
Image 74.
I
ncorrect installation
Image 75.
C
over, fuse box
2
3
4
Summary of Contents for Z 2500-130
Page 2: ......
Page 63: ...Z 2500 130 150 Specifications 63 www zepro com...