Z 2500-130/150
6
Important information
www.zepro.com
Z = Standard model
Max. lifting capacity x 1 (kg)
Max lifting height -130 = 1300 mm
-150 = 1500 mm
Cylinder model, MA = Double acting Adjustable Tilt
Single acting Single speed Lift
DA = Double acting Adjustable Tilt
Double acting Single speed Lift
E.g. Z - 2500 - 130 MA
_ _ _ - _ _ _ _ - _ _ _ _ _
1.3
Identification
1.4
CE marking
ZEPRO tail lifts for sale on the European market are CE marked (Conformité Européenne). The manufacturer
guarantees that the product complies with the EU Machinery Directive.
Follow the installation instructions carefully. Modifications not approved in writing by the manufacturer are not
permitted. Welding is not permitted.
1.5
Product approval
Properly assembled, this product meets relevant requirements according to EN 1756-1:2001 + A1:2008.
1.6
Hydraulic oil
If the hydraulic oil needs to be replenished, only the oil recommended by ZEPRO is permitted to be used.
Hydraulic systems with hydraulic oil tanks without labelling are only permitted to be filled with highly refined
mineral oil (art. no. 21963, 1 litre).
Hydraulic systems with hydraulic oil tanks marked with a specification for the hydraulic oil are only permitted
to be filled with the oil specified on the label.
1.7
Guarantee
The ZEPRO warranty applies only if assembly has been carried out according to ZEPRO's assembly instructions
by a ZEPRO approved bodybuilder.
After installation, testing and verification, register the tail lift’s delivery card to validate the warranty.
Summary of Contents for Z 2500-130
Page 2: ......
Page 63: ...Z 2500 130 150 Specifications 63 www zepro com...
