Z3N/Z3NU/Z3NN/Z3NNU/Z3NW/Z3NWU 75-100
6
Important information
www.zepro.com
1.3
Identification
1.4
CE marking
ZEPRO tail lifts for sale on the European market are CE marked (Conformité Européenne). The manufacturer
guarantees that the product complies with the EU Machinery Directive.
Follow the installation instructions carefully. Modifications not approved in writing by the manufacturer are not
permitted. Welding is not permitted.
1.5
Product approval
Properly assembled, this product meets relevant requirements according to EN 1756-1:2001 + A1:2008.
1.6
Hydraulic oil
If the hydraulic oil needs to be replenished, only the oil recommended by ZEPRO is permitted to be used.
Hydraulic systems with hydraulic oil tanks without labelling are only permitted to be filled with highly refined
mineral oil (art. no. 21963, 1 litre).
Hydraulic systems with hydraulic oil tanks marked with a specification for the hydraulic oil are only permitted to
be filled with the oil specified on the label.
1.7
Guarantee
The ZEPRO warranty applies only if assembly has been carried out according to ZEPRO's assembly instruc-
tions by a ZEPRO approved bodybuilder.
After installation, testing and verification, register the tail lift’s delivery card to validate the warranty.
E.g. Z3N - 75 - 110 SA
_ _ _ - _ _ _ - _ _ _ _ _
ZN
= 3 cylinders, narrow lift arm
Z3NU = 3 cylinders, narrow lift arm
u-protection
Z3NN = 3 cylinders, narrow lift arm
narrow frame
Z3NNU = 3 cylinders, narrow lift arm
narrow frame, u-protection
ZNW
= 3 cylinders, narrow lift arm
wide frame
Z3NWU = 3 cylinders, narrow lift arm
wide frame, u-protection
Max. lifting capacity x 10 (kg)
Max lifting height
x 10 (mm)
Cylinder model, MA = Double acting adjustable tilt
Single operation Lift
Summary of Contents for Z3N 75-100
Page 2: ......
